iTECH Co-Matic Bandsaw Feeder AF19 - Pneumatic

Special & Pneumatic power feed unit with vertical feed rollers, for use on a bandsaw or small resaw - The large serrated steel feed roller is mounted on a swinging arm mounted is bolted to the table on the right side of blade. The coil spring pressures the feed roller against the timber. The pneumatic system enables the feeder to automatically adjust to the thickness of the workpiece.

Ten different feed speeds from two-speed motor and belt change with four pulley combinations.

Large, multiple-roller guide fence can be mounted on left side of blade, can be set to cut required widths of timber. The maximum roller-blade clearance is 210mm (8-1/4").

Technical Specification:

Range of 10 feeds speeds                from 1 to 15 metres/min
Dimensions of feed rollers              175mm diam x 40mm high x 2 (max height 200mm)
Dimensions of roller fence              400mm long x 200mm high
Three phase drive motor                 0.5hp
Maximum clearance roller to blade    210mm
Nett weight of feeder                   80 kgs