TA25 WORKSHOP AIR FILTER WITH REMOTE CONTROL

The iTECH TA25 is a powerful variable workshop air filter, it is intended for a workshop up to 300 m3, especially where sanding takes place collecting and filtering fine airborn dust particles hanging in the workshop environment

The air passes through the electrostatic pre-filter into the main pleated filter, filtering 98% of all particles 5 microns and 86% of all particles 1 micron. The remote control unit has three settings for the motor speed and three different time settings of 1 hours, 2 hours and 4 hours, which can be used to clear the workshop after work has finished for the day.

The unit should ideally be suspended 2m off the ground.It is supplied with 4 mounting eyes so that it can be hung from the rafters or you can simply position on a high point. Supplied with a remote control and timer,it has an electrostatic prefilter and main filter the machine is ready to go. There is no better way to silently clean and filter your environment and health. Highly recommended for all workshops.

• Workshop up to 300m3
• Remote range 50ft
• Air flow variable : 940/ 1200/ 1800 cmh
• Air flow: H =1,044CFM M = 702CFM L = 556CFM
• Filtration Primary (Pleated typre) 5micron
• Filtration Secondary (Bag-type) 1 Micron
• Filtering cycle (for 7500cbf room) 8
• Area cleaned (max cbf) 7500
• Motor Power 150 W
• Nett Weight 25.4 kg
• Noise: H = 68dB(A), M = 66dB(A), L = 63dB(A)
• Remote control distance: 15 meters
• Dimensions LWH 780 x 510 x 300 mm