iTECH TA15 Workshop Air Filter 3 Speed 1 Micron

The new iTECH TA15 is a powerful variable workshop air filter, it is intended for a workshop up to 115 m3, especially where sanding takes place collecting and filtering fine airborn dust particles hanging in the workshop environment

The air passes through the electrostatic pre-filter into the main pleated filter, filtering 98% of all particles 5 microns and 86% of all particles 1 micron. The remote control unit has three settings for the motor speed and three different time settings of 1 hours, 2 hours and 4 hours, which can be used to clear the workshop after work has finished for the day. 

The unit should ideally be suspended 2m off the ground.It is supplied with 4 mounting eyes so that it can be hung from the rafters or you can simply position on a high point. Supplied with a remote control and timer,it has an electrostatic prefilter and main filter the machine is ready to go. There is no better way to silently clean and filter your environment and health. Highly recommended for all workshops.

Technical Specification:
Workshop up to                      115 m3
Remote range                        50ft
Air flow variable :                 425/ 595/765 cmh
Filtration Primary (Pleated typre)  5micron
Filtration Secondary (Bag-type)     1 Micron
Motor Power                         0.2 KW [1/4 HP]
Nett Weight                         13.4 kg
Noise:                              H = 68dB
Remote control distance:            15 meters 
Dimensions                          H254 x W425 x D502 mm